Products
A material with a future.
albko offers you the full range of commodities in a wide variety of alloys and tempers. Our range extends from sheets, plates and bars through tread plates, thin sheets and stucco to slit strip, circles, deep-drawing circles, triangles and profiles.
Need a special surface? Hammered, anodising quality, standard quality, washed, degreased or oiled. At albko you are in the right place.
We slit strip ourselves. How your aluminium slit strip is made
On this page
EN 485/573
| Alloys | EN AW 1050A, 1080A, 3003, 3005, 3105, 4006, 5049, 5005, 5754, 5083, 8006, 8011, 3004, 6016, 5182, 6082, 7075 |
|---|---|
| Temper | H0, H1x, H2x, H3x |
| Dimensions | Thickness 0.08 – 6.0 mm · width max. 1650 mm · ID 300 / 400 / 508 or 610 mm · OD max. 1950 mm |
| Surfaces | mill finish, hammered, washed, paper interleaved, film coated (50 / 80 or 100 micron, one or two sides), dry lubricant, anti-corrosion oil, passivation, Ti/Zr passivation, EDT |
EN 485/573
| Alloys | EN AW 1050A, 1080A, 3003, 3005, 3105, 4006, 5049, 5005, 5754, 5083, 8006, 8011 |
|---|---|
| Temper | H0, H1x, H2x, H3x |
| Dimensions | Thickness 0.08 – 6.0 mm · width 10 – 2000 mm |
| Surfaces | mill finish, hammered, degreased, washed, paper interleaved, film coated (50 / 80 or 100 micron, one or two sides) |
EN 485/573
| Alloys | EN AW 1050A, 1080A, 3003, 3005, 3105, 4006, 5049, 5005, 5754, 5083, 8006, 8011 |
|---|---|
| Temper | H0, H1x, H2x, H3x |
| Dimensions | Thickness 0.2 – 6.00 mm · width max. 2000 mm |
| Surfaces | mill finish, hammered, washed, paper interleaved, film coated (50 / 80 or 100 micron, one or two sides) |
EN 485/573
| Alloys | EN AW 1050, 5083, 5754, 6082, 7075, 7020, 7022 |
|---|---|
| Temper | H0/H111, T3, T4, T6 |
| Dimensions | Thickness 6.0 – 500 mm · width max. 1520 mm |
| Surfaces | mill finish, film coated |
EN 485/573
| Alloys | EN AW 1050A, 1080A, 3003, 3005, 3105, 4006, 5049, 5005, 5754, 5083, 8006, 8011 |
|---|---|
| Temper | H0, H1x, H2x, H3x |
| Dimensions | Thickness 0.5 – 7.0 mm · width max. 1500 mm |
| Surfaces | mill finish |
EN 485/573
| Alloys | EN AW 1050A, 1080A, 3003, 3105, 5049, 5005, 5754, 8006, 8011 |
|---|---|
| Temper | H0/H111, H22, H24, H26 |
| Dimensions | Thickness 0.3 – 2.0 mm · width max. 1500 mm |
| Surfaces | mill finish, degreased, paper interleaved |
EN 485/573
| Alloys | EN AW 1050A, 1080A, 3003, 3005, 3105, 4006, 5049, 5005, 5754, 5083, 8006, 8011 |
|---|---|
| Temper | H0, H1x, H2x, H3x |
| Dimensions | Thickness 0.8 – 3.5 mm · width max. 1850 mm |
| Surfaces | mill finish, film coated (50 / 80 or 100 micron, one or two sides) |
EN 485/573
| Alloys | EN AW 3105, 5754 |
|---|---|
| Temper | F, H111 |
| Dimensions | Thickness 1.0 – 9.0 mm · width max. 1500 mm |
| Surfaces | mill finish · duet and quintet (2 and 5 bar pattern) |
Aluminium profiles, custom drawing profiles (also thermally broken) and bars
| Alloys | 1050, 1350, 5754, 5083, 6060, 6063, 6082, 7020, 7022, 7075, 2219, 2024 |
|---|---|
| Dimensions | Diameter 5.0 – 600 mm |
Ask us for the dimensions, alloys and tempers you need. The albko team looks forward to your questions and enquiries.
Prefer to talk? +49 421 388987-0
